Protect your roofline. Finish it right.
Fascia is the vertical band of material that runs along the lower edge of your roofline — the board your gutters attach to. It covers and protects the ends of your roof rafters or trusses from the elements, and forms the horizontal trim that gives your roofline its finished, clean appearance.
Most homes were built with wood fascia, which eventually rots when exposed to Alberta's moisture and temperature swings. Shaam Gutters wraps your existing fascia board — or replaces it entirely — with formed aluminum that is permanently moisture-proof, never needs painting, and won't crack, split, or rot.
Alberta's freeze-thaw cycles are especially destructive to exposed wood. A chinook can swing temperatures from -20°C to +12°C in a matter of hours — this repeated expansion and contraction splits paint, opens grain, and allows moisture to penetrate. Over a few winters, wood fascia goes from painted and sound to cracked, soft, and rotten.
Rotted fascia is one of the most common causes of gutter failure — once the board behind the hanger softens, gutters pull away, sag, and separate. Water running behind a sagging gutter works directly against your siding and into your wall cavities. Aluminum fascia eliminates this entire failure chain.
Aluminum doesn't absorb moisture, expand, crack, or rot — ever. Once it's installed, you never have to think about your fascia again regardless of weather conditions.
Wood fascia needs scraping, priming, and painting every few years to stay protected. Aluminum fascia is finished with baked enamel at the factory — no upkeep, ever.
Gutters are only as good as what they're attached to. Solid aluminum fascia gives every hanger a firm, lasting anchor — keeping your gutters properly pitched and draining for decades.
We inspect the wood behind your existing fascia for rot and structural damage. If rafter ends need repair before wrapping, we identify this at the estimate stage.
Old fascia or damaged boards are removed. The rafter ends are cleaned, squared off, and made ready for the new aluminum profile.
Custom-formed aluminum fascia is installed over the prepared surface, nailed securely through pre-formed flanges, and mitered neatly at all corners.
Gutter hanger brackets are attached through the fascia into solid rafter structure — correctly spaced and pitched to ensure your gutters drain properly for years.
Fill out our quick form and we'll get back to you with a clear, fixed-price quote — usually the same week.
Get Your Free Estimate →